New Subscriber - DC Directory not working

[askb]

I have added a new subsciber into a 4.1.3 cluster. Everything works fine, the phones register OK and dont lose any function. However I cannot log into DC directory on the subsriber which in turn means I can not log onto the CCMAdmin page also.

I have checked host files and both can ping each other by name. The SQL replicaion is working fine but the DC Directory is causing me a huge headache.

I have rebuilt the subsciber but have the same issue

Any help would be greatfully appreciated

 

[Wavesg]

Also check the lmhost file and make sure that the address to the publisher is map to the name. Run dblhelper, under cisco/bin, to ensure the dbase replication is good and no jobs are on hold.

The following link will help you troubleshoot this issue

http://cisco.com/en/US/customer/pro...leshooting_guide_chapter09186a00803fa958.html

Stay cool; it’s not over yet!

 

[jerake75]

You used the same DC Directory password used on the publisher when you built the software on the new subscriber, correct...?

TMH

 

[askb]

I have it working. Backed up the datbase and run the following command

reconfig_cluster

Thanks for you help

 

[Wavesg]

Did the link I posted helped at all?

Stay cool; it’s not over yet!

 

[askb]

yes. but i had to follow the instructions for datbase over 100MB. I tried doing it normal way using just the reconfig_cluster cmd but this did not work

thanks

 

[Wavesg]

There is never a straight forward solution with Cisco. I'm glad you're working fine now.

Stay cool; it’s not over yet!