new pri???

[johnpoole]

DCH: 141 DISABLE INDICATION TIME: 14:13:38
REASON - **(00000086 )
anyone know reason 86.. can't find a match

john poole
bellsouth business
columbia,sc

 

[PERRYPJ]

JOHN IS THIS ON SUCCESSION

OLD ROLMEN WORKING ON NORTELS

 

[johnpoole]

no it's a inhouse between a 81c and an opt 11. the t is a patch cable and and it stands up (yellow) before enable. nothing in the lcnt table on eiter end. no csu .. 30 feet apart factory cables

john poole
bellsouth business
columbia,sc

 

[Sennback]

Yes it looks like a succession problem..
The option11 does it have release 3.0 installed?

It seems like a loadware problem we have here in sweden.
When we have a system upgraded to 3.0 we are not able to open d-channels.
We have to apply a loadware file wich upgrades the software wich is downloaded to the MSDL cards.

When this loadware is upgraded and the MSDL cards are donloaded with the new software it is possible to open the D-channels as usual.

 

[hawks]

Was this up and running? I noticed you said using factory cables did you flip the pairs?

 

[johnpoole]

yes i have a yellow on the opt end so it sees the 81, either switch will try to come up to a loop, but of course does release wronge mode. the loopback sees the usr mode as net on the 81 when it runs to a loopback. i did do a enl msdl 12 fdl, and sdl 100 ran as needed. this is one on 8 dchs.. in an 81 with 22 pri's.

john poole
bellsouth business
columbia,sc