Hello we currently have a ringing group on 6 POTS lines hunting in sequence. we are going to be getting a PRI and I'm trying to wrap my head about how to program the new number ringing appearence. since it will now be a did and I can manipulate the number to ring a set, but how do I manipulate the number to ring sevaral sets simultaniusly.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
New PRI and group ringing
- Thread starter PHXAZ
- Start date
Telecomboy
Programmer
Coverage button would work. If you point the DID to a phantom extension and then put coverage buttons on the other extensions for that phantom extension they will ring when someone calls the DID.
You can also set-up an actual group (say group 771), point the DID to 771 and set it to either group ring, sequential ring, etc.
You can also set-up an actual group (say group 771), point the DID to 771 and set it to either group ring, sequential ring, etc.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question