Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NEW PABX SYSTEM UAT?

Status
Not open for further replies.

itsnosecret

Technical User
Jul 7, 2005
64
AU
Can someone tell me what sort of checks are done when a system 1st gets built(new install of say a 11c) , is there a set of system checks you can do to confirm your pabx is functioning correctly (hardware and software )before handover?

Cheers.
 
did you do the install? when i 1st consider maint on a system i run a tnb in ld 83, in ld 117 i run inv generate all then inv prt all, checks the as built with the actual and the vintage and rls of the cards.. ld 60 stat, lcnt, ssck 0.. ldis each card...
ld 90
prt
0
net
ac1
nxx

return then repeat for npa and spn, make sure the data fields are full... spn bars will kill you... i perfer my ncos to be built with expansion... 0 for internal 2 for local 5 for ld 7 for open to the world. if it starts that way, later you can change it when someone wants, say local plus one npa.. or ld with auth..etc... one thing i do in larger switches when i set one up is say loop 60 is my 1st ld pri, then that is going to be route 60, dch 60, rlb 60 dgt 60... doing the same with all my pris make maint a lot more simple... today in my 81 pri 49 is route 49.. 100 is the same way 91 is the same way... by doing that is i have a problem, it's way quicker to go to 96 dis dch 49. ld 60 disl 49, ld 22 ltm route 49 or ld 80 trad 0 800049

john poole
bellsouth business
columbia,sc
 
btw, if you have 3000 series ld 32 fsum all, make sure your firmware is right.. it's a pain to schedule downloads unless your switch is 9 to 5... i work at a hosp, some 3904's are swapped for a download because, say the heliport, i can't schedule a ld 97 on that dept.. so i had to set up a card in the switch room, download 16 and swap the ones in service in critical care areas.. those should have been uploaded on the install

john poole
bellsouth business
columbia,sc
 
ld 83 tn sort and print, just go to 83 and enter tnb, it will list every tn and dn in the switch.. not very fast because it sorts by des. sorta a forgotten load

john poole
bellsouth business
columbia,sc
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top