New Modules

[silver987]

It's been a while since I have expanded a MICS. As I recall on a 6 port expansion module, trunks on the top and stations on the bottom? But which way do the trunk cards run in the expansion module, right to left like the base? And where would you put the analog module?
Thanks for any input.

Wayne T

 

[allworxguy]

Modules:
Trunk: top to bottom with line cards left to right
Station including ASM: bottom to top

Marv ccna

http://www.telemarv.ca

Sales, Installation & Service for Norstar, BCM & Allworx
Serving Ottawa and Eastern Ontario since 1990

 

[silver987]

Thanks.

Wayne T

 

[exsmogger]

To add to what Marv wrote, if you have XC software with 2 6-port cards all trunk modules must be installed on the 6-port card in slot 2. Station modules can go on either 6-port card.

Brian Cox
Georgia Telephone

http://Georgia-Telephone.com

http://www.linkedin.com/in/briancox1952

 

[allworxguy]

To add more:
Software 6.1MR and under ports 11 & 12 are reserved for Companion
And Fiber NAM can go anywhere but follow rule above.

Marv ccna

http://www.telemarv.ca

Sales, Installation & Service for Norstar, BCM & Allworx
Serving Ottawa and Eastern Ontario since 1990