Here in th UK the BCM is becoming very popular, Nortel are pushing this switch very hard.
i have fitted just 2 so far, and they were quite basic setups,, so no questions from me as yet....
Looking for some good input from this forum.I am looking at setting up BCM's in a VOIP environment. I've noticed some people posted problems in the other Nortel forum.
Rick Harris
SC Dept of Motor Vehicles
Network Operations
It is nice to see a BCM forum, I will be Project Managing BCM installations all across Europe and it would be great if you had some answers to faults if they arise,
Cheers,
Killian Kavanagh
PM/Installation Engineer and Programmer.... Ireland
I just went throught the BCM 3.6 Bootcamp, I think the BCM still has some issues, and the best place I see to use it is with an existing Norstar setup. From the little experience I have had with them I wouldn't recommend installing them in a new Phone environment, I think an option 11 does alot more with less trouble, but if a customer already has Norstar phones then the BCM is good, saving the cost of replacing the phones.
Thos of you that have a few in place, what do you think of them so far?
I just went throught the BCM 3.6 Bootcamp, I think the BCM still has some issues, and the best place I see to use it is with an existing Norstar setup. From the little experience I have had with them I wouldn't recommend installing them in a new Phone environment, I think an option 11 does alot more with less trouble, but if a customer already has Norstar phones then the BCM is good, saving the cost of replacing the phones.
Those of you that have a few in place, what do you think of them so far?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.