New FAS 2050 Install

[sbruce66]

I have been looking around all over the internet, is their any documentation on configuring and installing a FAS 2050. We are replacing a S550 from NetAPP and need help.

Scott

 

[RMGBELGIUM]

If you buy a new fas2050, normally it should come with a basic installation service.This means an engineer comes onsite to install the box into a rack, run basic configuration.All documents can be found on the netapp NOW site, now.netapp.com. As a customer, you should have received a login to this site, where you can consult all documents. If not, please contact your sales representative and have him sort the matter out for you.

rgds,

R.

NetApp Certified NCDA/NCIE-SAN

 

[czarj]

All the documentation you seek is available on the NOW site . You will need to log in via your Netapp username/password.

This link is the main page for the hardware installation documentation:

http://now.netapp.com/NOW/knowledge/docs/hardware/hardware_index.shtml

These links are specifically for the 2050:

http://now.netapp.com/NOW/knowledge/docs/hardware/filer/210-03681+B0.pdf

http://now.netapp.com/NOW/knowledge/docs/hardware/filer/210-03951+B0.pdf

Thanks,
Justin


--- You must not fight too often with one enemy, or you will teach him all your tricks of war.