gnwhite1201
Technical User
I am wanting to install a RAID 0 system in an existing system. And for simplicity sake, lets say it is done and I am running with my new system at RAID 0, how difficult will it be (even if it is possible) for me to convert from a RAID 0 to a RAID 0+1. My thinking is that I should just be able to add the new drives and go thru the motions. However I am not sure as this RAID stuff is all new to me. My situation is that my current drive, a 60gb IBM Deskstar (deathstar) has I guest bad resetting issues on the heads ‘cause it comes up with tan error message of ‘NTLR’ or something of the like and it sounds as if the heads are trying to start or stop or something. I just got the utility from then so this evening I am going to try it when I get home. But in the meantime I have purchased two MAXTOR 120gb w/ 2mb of cache and a simple RAID controller that will handle the configuration that I am wanting.
I will accept any reply with open arms and a warm smile!
Glenn
'What matters most in life is what we do for others'
I will accept any reply with open arms and a warm smile!
Glenn
'What matters most in life is what we do for others'