Hi, my company recently purchased a new ASA 5505 to replace our ancient SOHO3. I went through the setup and change the internal ip on vlan1 (inside) to match our internal LAN, and defined the external ip on vlan 2 (outside) to our static ip assigned by our ISP. I also defined the DNS servers for our ISP in the Configuration section of the ASDM. I put the ASA 5505 in place and I can access the internal stuff fine but have no outside access and of course I get the error about unable to locate egress interface. I have poured over the pdfs provided but am apparently missing an obvious step or something. Any help would be appreciated.
-S
-S