Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Networking to a old Nortel BCM200 R3.7

Status
Not open for further replies.

atascoman

Technical User
Oct 10, 2003
868
0
0
US
MOrning,

Just an experiment I am working on. I can get extension to extension dialing working, but when I try to make the Shoretel dial out over the BCM trunks the call fails. I can see the call go out the Shoretel but on the BCM side I am seeing strange digit patterns.

For example, I dial 9 210555-1212 from the Shoretel

On the Shoretel trunk tool I see 9+12105551212
On the BCM monitor I see 921055512

It's not losing the last two, but the last two digits before the last digit....if that makes sense :)

So I if dialed 9 2105551234 it would lose the 23.

Not a big deal. Just experimenting with some old systems I have on hand.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top