Networking Question

[phillip3606]

I currently have a BCM400 networked with BCM50e via ip.
The The BCM400 is the hub,and the BCM50e is the node.I have a PRI coming into the BCM400.Is it possible to route incoming DIDS from BCM400 To the Bcm50e.If so,what is the correct programming procedure.Both switches are currently
licensed for mcdn.
Thankyou

 

[steeef]

use destination codes on the bcm400 and route them to the bcm50. don't forget to add the correct remote access package to the PRI that allows access to MCDN trunk.

 

[cook1082]

Also make target lines the receive the calls.