Networking on different releases 3

[AvayaNACR]

Has anyone networked a R9 IPO500v2 to an old R3 system via IP QSIG? I had a customer have to do an emergency replacement and wants 4 digit dialing over the network back to the old systems.

 

[tlpeter]

Qsig should not be a problem.
You do need a networking licence for qsig on the R9 system.
So perhaps h323 is an option too?

BAZINGA!

I'm not insane, my mother had me tested!

 

[mforrence]

QSIG will work regardless of release. Not the same requirement as SCN.

 

[tlpeter]

I am not talking about a scn but just a h323 link.

BAZINGA!

I'm not insane, my mother had me tested!

 

[AvayaNACR]

Yeah we are going to order a temp license on the R9 system. Since the older systems are set up as H323 trunks, anything special on the R9 side? I don't recall that being an option, only QSIG.

Thanks

 

[tlpeter]

You can setup an h323 trunk and then select scn or h450 which is what you need.

BAZINGA!

I'm not insane, my mother had me tested!

 

[avayaipguy]

I just did this for a customer last Wednesday. I have an IP 500V2 R9 to a 406 R3.2 tlpeter is absolutely correct with a h323 trunk and h450 on the 406. I also created a short code in the 406 to dial the extensions at the remote site. Using 1100 - 1199 for an example. Code is 11XX, the feature is dial, telephone number is a . and the line group ID is the h323 trunk you have created to the remote IPO.