Networking Magix to Definity

[nascomm1]

Sorry if this subject was explained before, but I cant seem to access the search feature on this forum.

I have a customer with five Magix systems each independent from the other. they would like to network all the sites, but you can only network three of the Magix systems. I was thinking about proposing replacing the main office system with a Definity, and networking it with the four Magix systems off site. My other thought was perhaps networking two groups together, two sites in one network three on the other and then networking the two networks together?

Either way your thoughts would be appreciated, also if anyone has done this with the definity I'd like to know the basics.

Thanks,
Vince

 

[wannabe1]

We have a customer with a Definity as the hub to about 5 Magix. Make sure your Definity has the RTU for UDP & ISDN-PRI. We use point to point T1's back to the G3 (Definity, now CM). We can dial to all sites, 4 digit dial. All the programming procedures for both products may take some research. A bit much to go through step by step on a thread.
sl

 

[dagwoodsystems]

Check out the MERLIN LEGEND^® R6.1 Network Reference manual at

http://support.avaya.com/edoc/docs/legend/leg61nr1.pdf.

It covers all the basics, including the star network (multiple Legend/Magix around a Definity hub).