Networking BCM1000 2.5 with a BM50 3.0

[bostech]

Hello All,

I can't find any info on this specific scenario. Customer has a BCM1000 2.5 at one location. Want's to install a BCM50 3.0 at new location and network the two.

As far as I can tell, as long as both sites have H.323 trunks configures, both systems will talk to each other. Does anyone see any issues with this?

Also, I may want to enable MCDN functionality. Does anyone know if a current MCDN auth. code will work on older systems or will I need to track down an old auth. code?

Thanks

 

[Firebird Scrambler]

I've played with a BCM 1000 System some years ago with a Succession system and that had to have H323 because I was on Release 2.5 (then went to 3.7). Providing the MCDN Auth Code is for the ...

Business Communications Manager MCDN/Q.Sig Networking Software Authorization Code

For use with the BCM 200 and 400 only

Part Codes:
Paper: NTKC0002
E-Auth: NTKC0605

It shouldn't present a problem for the 2.5 version.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[bostech]

Thanks, Firebird.