Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

networking 2 magix systems with pt to pt t1

Status
Not open for further replies.

tahoe189

Vendor
Jan 19, 2010
9
US
Can i get some assistance on networking 2 magix systems with a point to point T1. Also need to use ARS to route all call except 911 over the T1.
 
Welcome aboard! [wavey2]

If possible, could you provide some basic information about your set-up (how both systems are carded, configured, what you've tried so far and some specific questions).

While we can offer some advice and suggestions for specific problems/questions, large scale in-depth programming assistance is beyond the scope of this forum and securing the services of a local Authorized Avaya Business Partner would be worth the while.

If it ain't broke, I haven't fixed it yet.
 
Also, depending on your level of experience and/or knowledge of telephony, and in particular the Avaya Legend/Magix systems, my suggestion is to download the Legend Network Reference document in addition to any others you don't have, and read them. You will find most of the information you need in them.

Avaya's website: support.avaya.com

Then, post all the questions you want to the forum. This forum has a wide range of folks participating to help you.

Many times your answer can even be found by searching previous posts, especially on popular subjects, like networking switches, Primary ISDN, DS1, DID service, etc.

Happy reading!

....JIM....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top