Networking 2 BCM50 units for remote site

[ewaenink]

Our main office phone system is a BCM50. We are opening a new office with a couple people and we would like to setup a second BCM50 and connect it to our main office.

I am very new to dealing with the phone systems so my knowledge is limited

Our main office BCM50 is configured and has been running for several years. The new unit has been setup with a PSTN line and an IP phone and calling and in out is working.

We would now like to network the units to have the following capabilities.
Calling extensions back and forth between offices.
Transfer calls to other office
Transfer a call from the main office to the voice mail box at the second office.
Ability for both offices to call out using the other offices PSTN line, IE dial 9 for local office, 8 for remote office.

Could someone please provide direction on how to set this or a link to some instructions that detail this. Keep in mind that I am a beginner. I realize this is more time consuming due to my inexperience, if someone is willing to spend the time to walk me though the setup until it is working I would be more than happy to send them some money by paypal.

 

[Dasheen]

u need ip trunks (keycode), mcdn keycode, separate network into voice and data vlans, minimum of 4 digit extensions, no duplicate extensions.