Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Networketr 8.2 Need to change Media Pool used

Status
Not open for further replies.

Josalgra1

Technical User
Nov 16, 2015
1
US
Hi all,
I am running Networker 8.2, I have 3 Jobs and 3 Groups like this:

Daily Pool
Weekly Pool
Monthly Pool

I have the same 3 jobs (Daily Pool, Weekly Pool and Monthly Pool)
My issue is that the all the groups are backing up to the same Media Pool "Daily Pool"
the goal was to have the Weekly group using the Weekly Pool and the Monthly Group backup to the "Monthly pool" accordingly.
The GUI on Networker is pointing to the correct pools but at the time that the 3 jobs runs they are using the same "Daily Pool" media pool.
How can I fix this? I don't have a clue when it comes to the CLI in networker.
Any advise will be appreciated.
Thanks,

 
This is the general guideline:

1. You should not make your config more complicated than necessary. you better name the groups
Daily
Weekly
Monthly
But this is also confusing as each group will be started daily.
May I suggest you simply name them after their start time like DAILY_2300_INT_2400 - It would start the group at 2300 with an interval of 24 hours, once every day.

2. Create the 3 Pools
Daily Pool
Weekly Pool
Monthly Pool

3. For each pool select the correct group from the savegroup list.

If you still have problems it is hard to help you without any further knowledge about your configuration.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top