I have an Faststor-2 tape library (8 Slots) connected to a Adaptec 29320-ALPR Redhat kernel 2.6.9-5.ELsmp Intel server. Looking to run Networker 7.2.2.
So far I have installed Redhat version 4.0 (2.6.9-5.ELsmp)Base (No patches at this point)
I install the recommended driver for the Adaptec
Lsmod
aic79xx
It installed fine now errors and is in the kernel.
I then installed Networker client/Driver/storagenode/server.
After doing that I get the following error when I try to run inquire on the server:
inquire
NetWorker: SYSTEM error: failed to set SCSI timeout on device '/dev/nst0' (Inappropriate ioctl for device)
scsidev@0.5.0: |Disk, /dev/nst0
What am I doing wrong or what do I need to set in order to make this work.
Does anyone here have Redhat AS 4.0 running with Networker 7.22?
Thanks again in Advance.
Rob
So far I have installed Redhat version 4.0 (2.6.9-5.ELsmp)Base (No patches at this point)
I install the recommended driver for the Adaptec
Lsmod
aic79xx
It installed fine now errors and is in the kernel.
I then installed Networker client/Driver/storagenode/server.
After doing that I get the following error when I try to run inquire on the server:
inquire
NetWorker: SYSTEM error: failed to set SCSI timeout on device '/dev/nst0' (Inappropriate ioctl for device)
scsidev@0.5.0: |Disk, /dev/nst0
What am I doing wrong or what do I need to set in order to make this work.
Does anyone here have Redhat AS 4.0 running with Networker 7.22?
Thanks again in Advance.
Rob