Networked Magix w/ Pri

[dgillson]

Have 2 Magix Ssystems networked thru Cisco 3810 routers. The Cisco routers are using "clear Channel". D channel comes up and works fine BUT Cisco only sees 4 of the 12 channels programmed in the Magix b channel group. If we delete the 4 working channels a diffrent set of channels come up but still only 4. On-site Back to back testing with our demo Magix and a T-1 crossover cable to one of the nodes
works fine all 12 channels work.
Typical responce from Avaya TSO " show me a credit card"

 

[franke]

Are the csu/dsu's set up to recognize the proper channels and/or bandwidth?

 

[dgillson]

Franke;
Thanks for the reply. We did fix this over the weekend and it was a bandwidth issue. The carrier of the frame circuit only had a CIR of 256K preventing us from getting more then 4 channels.

 

[franke]

Ain't it grand when everything comes together (and more so when it's not your fault)