I have 2 magix networked via PRI across a full point to point t-1. I have 1 PRI connected to site A for PSTN access. In site B is the Merlin Messaging utilizing centralized vmail. All calls ring directly to the auto att. Site B tandems site A's PRI for PSTN access. Everything works great except when calls are transfered out of the auto attendant back to site A no caller id info is shown. Calls transfering out of the AA to the same site show caller id normally. So caller id info is making it across the PtP once, but not twice. Will I need to move the vmail over to the same side as the PRI? Any other ideas? Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
networked magix caller id problem
- Thread starter bluemr2
- Start date
Similar threads
- Locked
- Question