I have a customer that has a BCM 400 3.6 at one site, a BCM 400 3.7 at another site, and a BCM50 2.0 at a third site. They are all connected by MPLS. The question is can Network Paging be set-up on this configuration? Any help on this would be greatly appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Networked BCM Paging 1
- Thread starter WOTRS
- Start date
Deweyhumbolt
Technical User
Not through an MPLS network using the BCM. But, one of the regulars mentioned a 3rd party product that allowed paging over a network. Hopefully, they will respond.
-
1
- #3
I've used a Bogen TAM-B connected to an ATA to page remote sites. Only requirement is having overhead paging at the site. Call the ATA, it answers and passes the output through to the page system. I'm not aware of a way to page through the sets over IP trunks. Maybe someone else is.
There is no page-over-IP abilities for BCM.
But I really like the creative work around with the ATA idea.
(let's hope the voice quality is good over the MPLS/WAN or the
pages could be funny)
Feature ** RLS: The feature code to fix annoying phone support people! ;-)
But I really like the creative work around with the ATA idea.
(let's hope the voice quality is good over the MPLS/WAN or the
pages could be funny)
Feature ** RLS: The feature code to fix annoying phone support people! ;-)
- Status
Similar threads
- Locked
- Question
- Locked
- Question