Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Network systems

Status
Not open for further replies.

PBlaney

Technical User
Apr 23, 2007
58
US
Has anyone networked an Avaya CM 6.0 with Modualar Messeging to a CS1K-MG release 3. I need to be able to light the MWI on the M39XX phones on the CS1K and their mail box is on the Avaya MM. Avaya has a doc that came out 3/2010 stating with Qsig PRI trunks from the Meridian CS1K release 4 connected to an Avaya G450 gateway then H248 connection to the Avaya S8800 and MM it would work. They tested it in a lab. :) so before release 4 has anyone gotten this to work?
 
You most likely would be abile to as long as you had the ability to still use Qsig. If you do not, forget about getting the package added. No more keycodes for 3.0
 
Qsig should work, but like callenj said, if you don't already have the packages you wont get them for 3.0.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top