Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Network + Subnet Mask

Status
Not open for further replies.

telklass

IS-IT--Management
Aug 8, 2015
337
0
0
US
Good morning all,


Here i explain a network topology and looking to find out a better scheme which will meet my needs.

I want to configure a network with seven (7) subnet , each of these networks must support 10 host for the LAN and a wireless network connection for 20 users, also for the total of 8 network i will use a cisco router model 29XX series but with one internet connection for all the 8 networks (subnet). I have no trouble to create the subnet for the networks but my confusion is with the internet connection in case the ISP give me only one external IP address or even with several IPs.

If someone has an idea, please share with me.

Look forward to your reply.

Thanks !




 
You will need to use NAT..

[americanflag] Go Army!
Tek-TIP Member 19,650
CCNP, CCNA, Net+, Sec+ etc etc
 
What's the question? Routing? Like Jeter said, you'll need to NAT/PAT

ip access-list extended IP-Options-and-Powerball
deny ip any any winning-powerball-ticket
permit ip any any option any-options
!
class-map ACL-Options-and-Powerball
match access-group name IP-Options-and-Powerball
!
policy-map CoPP-POLICY
class ACL-Options-and-Powerball
drop
!
control-plane
service-policy input CoPP-POLICY
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top