Network services not work

[lindelott]

hi guys,
this forum is very interesting,compliments...
I appreciate our help,this is my scenario

1)TSE3.2SP4_______pri_______VPN_______bri________2)TSE3.2SP4

I use numtype ED with numbering plane coordinated in each site and tab PNR for LCR
Now,FME it's ok in oneway(from 2 to 1),in the other way I see on digital set display "format error"
call back not work neither on free/busy

This is my setup:
SITE2:
[tt]
RODDI
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
153 4 1606100000000250006000000 0 1 0
3 1 1505100000000252000000000 0 4 0
ROCAI
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
4 5110100000000010 5 3110000001 0 30 128 00151515 311100000031 101100
RODAI
ROU TYPE VARC VARI VARO FILTER
4 SL60 H'00000310 H'15400000 H'06000000 NO
[/tt]



SITE1:
[tt]
RODDI
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
153 3 1505100000000252005000000 0 1 0
75 1 1505100000000252005000000 0 4 0
71 2 1505100000000252005000000 0 4 0

ROCAI
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
3 5110000000000010 5 3110000001 0 30 128 00151515 111110000031 101100

RODAI
ROU TYPE VARC VARI VARO FILTER
3 SL60 H'00000310 H'15400000 H'06300000 NO

[/tt]

Thanks in advance