Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

network ready printer

Status
Not open for further replies.
matrixx1

matrixx1

IS-IT--Management
Feb 16, 2006
66
US
How do I setup a network ready fax/printer to a very small network. The network basically has three computers hooked up to a dsl broadband sharing router (ip is not static). You have to assign the ip # to the printer. I know how to do this on a bigger (domain controller) network...The local ip for the router is 192.168.1.1 Should I just assign the printer 192.168.1.2. What about the DNS settings?
 
Sort by date Sort by votes
Your standard Linksys router assigns DHCP starting at 192.168.1.100
You can basically pick any IP outside the DHCP range. So, anything between .2 and .99 will work.

You don't have to worry about DNS for a printer.


MCSE CCNA CCDA
 
Upvote 0 Downvote
ok...so I should just leave the dns blank or should i put the router ip address for the dns?
 
Upvote 0 Downvote
Yes, the router's LAN IP address (192.168.1.1) would be correct.


MCSE CCNA CCDA
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

goombawaho
  • Locked
  • Question
Access Point Isolation from wired network
Replies
0
Views
77
goombawaho
goombawaho
theilercabin
  • Locked
  • Question
Networking Home Wireless Network to Office Wireless Network
Replies
4
Views
150
goombawaho
goombawaho
goombawaho
  • Locked
  • Question
Add Public WiFi to private network
Replies
11
Views
217
goombawaho
goombawaho
sneaker2002
  • Locked
  • Question
looking for network ideas 1
Replies
9
Views
171
goombawaho
goombawaho
bgreen39
  • Locked
  • Question
Network Daisy Chain
Replies
2
Views
128
goombawaho
goombawaho

Part and Inventory Search

Sponsor

Back
Top