Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Network problem

Status
Not open for further replies.

01071981

ISP
Aug 18, 2009
18
IN
Hi All,
I am new to networking and just had one query
I have 2 networks
10.5.20.1
255.255.255.0
and
10.5.120.1
255.255.255.0

My question is that these 2 network will communicate with each other or not.
If some one can provide the brief descripton also that will be great.
waiting for a quick reply.
 
Yes, the two networks can communicate with each other, but no they are not on the same network segment. Therefore, given the network addresses and masks you will need a router.
The IP address consists of a network portion and a host portion. The larger the network portion (more bits assigned), the fewer the hosts you can have on that segment. Hosts that are on the same segment do not need a router to talk to each other.
If you place both these devices on the same wire and configure them as you have, they will electrically "see" the data, but they will not "logically" see it as it will appear to be for a different network/host.
Some tutorials on network addressing and sub-netting, along with CIDR notation may make things the concept a little clearer. It isn't a difficult concept, but it can get a little funky in the math.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top