We recently moved some of our network around, however we left untouched the Novell server, on which the print server profiles and Accpac data files reside. For some bizarre reason, Accpac now prints to Printer #2 in the network, even though the capture is configured to Printer #1. We think it may be a question of changing the LPT in Accpac but have no idea how to do that. Any help would be appreciated.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
network printing problems in Accpac Plus 6.5 (dos)
- Thread starter catrahal
- Start date
Michael514
MIS
Hi,
A little more information would be needed. 1. From a DOS prompt what does the "capture /sh" display. Are the LPT ports pointing to the right print queues ? In Plus press F3 and goto the printer setup. Is the printer pointing to the right LPT port ? (You can also change ports from here)
I'm assuming you are using Netware 4 or higher. Did you more anything in the NDS tree of Novell that could cause another login script to run?
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question