Network Interfaces

[btrain08]

What are the private and public network interfaces used for on the MAS servers? If I use QSIG/DS1 for the connection to my PBX, what's the network interfaces used for? 3.1 system with 2 mas, 1 mss and 1 mn

 

[98Converter]

Quick answer: Private connections allow the MSS/MAS' to talk with each other over a locally provided (by Avaya) ethernet hub. The public obviously interfaces to your LAN...



Thanks,
CJH

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.

 

[btrain08]

got it.. reason being the publics NIC light is out and our network guys see no data going over it, but the system is behaving fine. the only thing I can't do it RDP to the server. I think it's a bad patch cable. If I swapped this, is there going to be any impact?

 

[98Converter]

If it's not connected now - then there would be no impact, rather improvement for networking messages to other sites (if you have other sites,) Web Client access, Outlook or Lotus thick clients integrations & RDP...


Thanks,
CJH

We are what we repeatedly do. Excellence, then, is not an act but a habit. ARISTOTLE 384-322 B.C.