I searched the forum but none applied to what I have happening. If I reboot the system I can ping it and open the config. As soon as I try to do a save and then re-open I get the Failed to Communicate error. I try to ping the IPO and it times out. If I do a reboot, everything seems to work fine. Any suggestions?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Network Error - Failed to Communicate with IP Office
- Thread starter ipandy
- Start date
intrigrant
Systems Engineer
IP Adressing or both LAN's on the same switch/subnet
- Thread starter
- #3
there is maybe another device with the same IP address on the network.
that sounds like the symptoms for that
Joe W.
FHandw, ACSS (SME), ACIS (SME)
“Quality is never an accident; it is always the result of high intention, sincere effort, intelligent direction and skillful execution; it represents the wise choice of many alternatives.”
that sounds like the symptoms for that
Joe W.
FHandw, ACSS (SME), ACIS (SME)
“Quality is never an accident; it is always the result of high intention, sincere effort, intelligent direction and skillful execution; it represents the wise choice of many alternatives.”
- Status
Similar threads
- Locked
- Question