Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Network Daisy Chain
- Thread starter bgreen39
- Start date
No, you need to connect each computer to a separate port on the router or switch. There is NO "sharing" or "daisy chaining" in a UTP wired Ethernet LAN. Each has its own cable run or path. Just use an appropriately Category rated, Ethernet patch cord and connect it between an unused port on the Linksys router and your new computer.
Hope this helps!
....JIM....
Hope this helps!
....JIM....
goombawaho
MIS
Yes, as said above. Like this:
- Status
Similar threads
- Locked
- Question