I feel so stupid admitting it, but I was trying to cp an entire disk (~400G) over the network.
What I did was mount the remote share,
mount remotesystem:/remoteshare /myhome/remoteshare
and then did a,
cp -R /myhome/remoshare/* /myhome/myshare
apart from getting some warnings of the likes of "couldnt cp a .something" it went smoothly for sometimes. I was checking /myhome/myshare and could see some stuff already being copied. But I dont know why, but the destination machine simply froze after sometime. I had to do a hard boot then. Well some stuff was copied, but I dont understand why it crashed in between. The destination has a good amount of space, more than the sourse server. There have been no network outagesin between. So what could be the problem. Is this a server thing/ hardware issue or aything else ??
Please advise.
Just in case, I have posted some stuff from syslog when the system crashed.
Jun 13 14:29:55 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 0, SCB flags 0x0, cmd 0x0
Jun 13 14:29:55 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 3, SCB flags 0x0, cmd 0x0
Jun 13 14:29:55 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 16, SCB flags 0x0, cmd 0x0
Jun 13 14:29:55 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 23, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 3 not valid during SELTO.
Jun 13 14:29:56 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 3 not valid during SELTO.
Jun 13 14:29:56 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 11, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 5, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 28, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 14, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 14 not valid during SELTO.
Jun 13 14:29:56 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 20, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 31, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 31 not valid during SELTO.
Jun 13 14:29:56 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 12, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 27, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 6, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 29, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 3 not valid during SELTO.
Jun 13 14:29:56 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) aic7xxx_isr - referenced scb not valid during scsiint 0x17 scb(23)
Jun 13 14:29:56 charisma kernel: SIMODE0 0x0, SIMODE1 0xac, SSTAT0 0x7, SEQADDR 0x96
Jun 13 14:30:01 charisma kernel: (scsi1:0:5:-1) Unexpected busfree, LASTPHASE =
0x0, SEQADDR = 0x162
Jun 13 14:30:01 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 31, SCB flags 0x0, cmd 0x0
Jun 13 14:30:01 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 30, SCB flags 0x0, cmd 0x0
Jun 13 14:30:01 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 25, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 13, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 3 not valid during SELTO.
Jun 13 14:30:02 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 5, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 16, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 11, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 0, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 2, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 14, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 28, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 2 not valid during SELTO.
Jun 13 14:30:02 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 2 not valid during SELTO.
Jun 13 14:30:02 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 2 not valid during SELTO.
Jun 13 14:30:02 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x8 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 14, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 31, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 31 not valid during SELTO.
Jun 13 14:30:02 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 12, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) aic7xxx_isr - referenced scb not valid during scsiint 0x17 scb(27)
Jun 13 14:30:02 charisma kernel: SIMODE0 0x0, SIMODE1 0xac, SSTAT0 0x7, SEQADDR 0x91
Jun 13 14:30:07 charisma kernel: (scsi1:0:5:-1) Unexpected busfree, LASTPHASE =
0x0, SEQADDR = 0x162
Jun 13 14:30:07 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 29, SCB flags 0x0, cmd 0x0
Jun 13 14:30:07 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 23, SCB flags 0x0, cmd 0x0
Jun 13 14:30:07 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 2, SCB flags 0x0, cmd 0x0
Jun 13 14:30:07 charisma kernel: scsi1 channel 0 : resetting for second half of
retries.
Jun 13 14:30:07 charisma kernel: SCSI bus is being reset for host 1 channel 0.
Jun 13 14:30:09 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 2, SCB flags 0x0, cmd 0x0
Jun 13 14:30:09 charisma kernel: (scsi1:0:5:0) Synchronous at 160.0 Mbyte/sec, offset 31.
Jun 13 14:30:10 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 2 not valid during SELTO.
Jun 13 14:30:10 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x8 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:30:10 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 2 not valid during SELTO.
Jun 13 14:30:10 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:30:10 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 2, SCB flags 0x0, cmd 0x0
Thanks.
Also on the source server (NFS and Samba server), the monitor continuosly spits out these messages while also refusing to start the xserver or kdm. I am not able to fully comprehend these messages. Would appreciate help in understanding the problem.
Jun 14 12:18:02 chaos2 rpc.mountd: authenticated unmount request from IP#:886 for /home/csl2 (/home/csl2)
Jun 14 12:20:59 chaos2 smbd[17735]: [2002/06/14 12:20:59, 0] smbd/service.c:make_connection(244)
Jun 14 12:20:59 chaos2 smbd[17735]: [2002/06/14 12:20:59, 0] lib/debug.c:check_log_size(437)
Jun 14 12:20:59 chaos2 smbd[17735]: check_log_size: open of debug file /var/log/samba/log.smbd failed - using console.
Jun 14 12:20:59 chaos2 smbd[17735]: csl-149a (IP#) couldn't find service meagan
Jun 14 12:20:59 chaos2 smbd[17735]: [2002/06/14 12:20:59, 0] smbd/service.c:make_connection(244)
Jun 14 12:20:59 chaos2 smbd[17735]: csl-149a (IP#) couldn't find service meagan
Another piece that bothers me is,
Jun 13 14:56:21 chaos2 kernel: 08:41: rw=0, want=1775615396, limit=525453988
Jun 13 14:56:21 chaos2 kernel: attempt to access beyond end of device
Jun 13 14:56:21 chaos2 kernel: 08:41: rw=0, want=1775615396, limit=525453988
Jun 13 14:56:21 chaos2 kernel: attempt to access beyond end of device
Jun 13 14:56:21 chaos2 kernel: 08:41: rw=0, want=1775615396, limit=525453988
Jun 13 14:56:21 chaos2 kernel: attempt to access beyond end of device
Jun 13 14:56:21 chaos2 kernel: 08:41: rw=0, want=1775615396, limit=525453988
Jun 13 14:56:21 chaos2 kernel: attempt to access beyond end of device
Jun 13 14:56:21 chaos2 kernel: 08:41: rw=0, want=830851520, limit=525453988
Jun 13 14:56:21 chaos2 kernel: attempt to access beyond end of device
Jun 13 14:56:21 chaos2 kernel: 08:41: rw=0, want=830851520, limit=525453988
Jun 13 14:56:21 chaos2 kernel: attempt to access beyond end of device
Jun 13 14:56:21 chaos2 kernel: 08:41: rw=0, want=830851520, limit=525453988
Jun 13 14:56:21 chaos2 kernel: attempt to access beyond end of device
Jun 13 14:56:21 chaos2 kernel: 08:41: rw=0, want=830851520, limit=525453988
But the server as such is working fine serving out both samba and NFS shares. The only probelm as I said before is the refusal to start xserver or kdm. This server is also the server from which I am tryong to copy stuff from. Does anythig here indicate any problem with what I am trying to do.
Thanks.
What I did was mount the remote share,
mount remotesystem:/remoteshare /myhome/remoteshare
and then did a,
cp -R /myhome/remoshare/* /myhome/myshare
apart from getting some warnings of the likes of "couldnt cp a .something" it went smoothly for sometimes. I was checking /myhome/myshare and could see some stuff already being copied. But I dont know why, but the destination machine simply froze after sometime. I had to do a hard boot then. Well some stuff was copied, but I dont understand why it crashed in between. The destination has a good amount of space, more than the sourse server. There have been no network outagesin between. So what could be the problem. Is this a server thing/ hardware issue or aything else ??
Please advise.
Just in case, I have posted some stuff from syslog when the system crashed.
Jun 13 14:29:55 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 0, SCB flags 0x0, cmd 0x0
Jun 13 14:29:55 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 3, SCB flags 0x0, cmd 0x0
Jun 13 14:29:55 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 16, SCB flags 0x0, cmd 0x0
Jun 13 14:29:55 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 23, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 3 not valid during SELTO.
Jun 13 14:29:56 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 3 not valid during SELTO.
Jun 13 14:29:56 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 11, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 5, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 28, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 14, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 14 not valid during SELTO.
Jun 13 14:29:56 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 20, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 31, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 31 not valid during SELTO.
Jun 13 14:29:56 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 12, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 27, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 6, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 29, SCB flags 0x0, cmd 0x0
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 3 not valid during SELTO.
Jun 13 14:29:56 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:29:56 charisma kernel: (scsi1:-1:-1:-1) aic7xxx_isr - referenced scb not valid during scsiint 0x17 scb(23)
Jun 13 14:29:56 charisma kernel: SIMODE0 0x0, SIMODE1 0xac, SSTAT0 0x7, SEQADDR 0x96
Jun 13 14:30:01 charisma kernel: (scsi1:0:5:-1) Unexpected busfree, LASTPHASE =
0x0, SEQADDR = 0x162
Jun 13 14:30:01 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 31, SCB flags 0x0, cmd 0x0
Jun 13 14:30:01 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 30, SCB flags 0x0, cmd 0x0
Jun 13 14:30:01 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 25, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 13, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 3 not valid during SELTO.
Jun 13 14:30:02 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 5, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 16, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 11, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 0, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 2, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 14, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 28, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 2 not valid during SELTO.
Jun 13 14:30:02 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 2 not valid during SELTO.
Jun 13 14:30:02 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 2 not valid during SELTO.
Jun 13 14:30:02 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x8 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 14, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 31, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 31 not valid during SELTO.
Jun 13 14:30:02 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 12, SCB flags 0x0, cmd 0x0
Jun 13 14:30:02 charisma kernel: (scsi1:-1:-1:-1) aic7xxx_isr - referenced scb not valid during scsiint 0x17 scb(27)
Jun 13 14:30:02 charisma kernel: SIMODE0 0x0, SIMODE1 0xac, SSTAT0 0x7, SEQADDR 0x91
Jun 13 14:30:07 charisma kernel: (scsi1:0:5:-1) Unexpected busfree, LASTPHASE =
0x0, SEQADDR = 0x162
Jun 13 14:30:07 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 29, SCB flags 0x0, cmd 0x0
Jun 13 14:30:07 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 23, SCB flags 0x0, cmd 0x0
Jun 13 14:30:07 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 2, SCB flags 0x0, cmd 0x0
Jun 13 14:30:07 charisma kernel: scsi1 channel 0 : resetting for second half of
retries.
Jun 13 14:30:07 charisma kernel: SCSI bus is being reset for host 1 channel 0.
Jun 13 14:30:09 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 2, SCB flags 0x0, cmd 0x0
Jun 13 14:30:09 charisma kernel: (scsi1:0:5:0) Synchronous at 160.0 Mbyte/sec, offset 31.
Jun 13 14:30:10 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 2 not valid during SELTO.
Jun 13 14:30:10 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x8 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:30:10 charisma kernel: (scsi1:-1:-1:-1) Referenced SCB 2 not valid during SELTO.
Jun 13 14:30:10 charisma kernel: SCSISEQ = 0x5a SEQADDR = 0x9 SSTAT0 = 0x10 SSTAT1 = 0x8a
Jun 13 14:30:10 charisma kernel: (scsi1:-1:-1:-1) CMDCMPLT without command for SCB 2, SCB flags 0x0, cmd 0x0
Thanks.
Also on the source server (NFS and Samba server), the monitor continuosly spits out these messages while also refusing to start the xserver or kdm. I am not able to fully comprehend these messages. Would appreciate help in understanding the problem.
Jun 14 12:18:02 chaos2 rpc.mountd: authenticated unmount request from IP#:886 for /home/csl2 (/home/csl2)
Jun 14 12:20:59 chaos2 smbd[17735]: [2002/06/14 12:20:59, 0] smbd/service.c:make_connection(244)
Jun 14 12:20:59 chaos2 smbd[17735]: [2002/06/14 12:20:59, 0] lib/debug.c:check_log_size(437)
Jun 14 12:20:59 chaos2 smbd[17735]: check_log_size: open of debug file /var/log/samba/log.smbd failed - using console.
Jun 14 12:20:59 chaos2 smbd[17735]: csl-149a (IP#) couldn't find service meagan
Jun 14 12:20:59 chaos2 smbd[17735]: [2002/06/14 12:20:59, 0] smbd/service.c:make_connection(244)
Jun 14 12:20:59 chaos2 smbd[17735]: csl-149a (IP#) couldn't find service meagan
Another piece that bothers me is,
Jun 13 14:56:21 chaos2 kernel: 08:41: rw=0, want=1775615396, limit=525453988
Jun 13 14:56:21 chaos2 kernel: attempt to access beyond end of device
Jun 13 14:56:21 chaos2 kernel: 08:41: rw=0, want=1775615396, limit=525453988
Jun 13 14:56:21 chaos2 kernel: attempt to access beyond end of device
Jun 13 14:56:21 chaos2 kernel: 08:41: rw=0, want=1775615396, limit=525453988
Jun 13 14:56:21 chaos2 kernel: attempt to access beyond end of device
Jun 13 14:56:21 chaos2 kernel: 08:41: rw=0, want=1775615396, limit=525453988
Jun 13 14:56:21 chaos2 kernel: attempt to access beyond end of device
Jun 13 14:56:21 chaos2 kernel: 08:41: rw=0, want=830851520, limit=525453988
Jun 13 14:56:21 chaos2 kernel: attempt to access beyond end of device
Jun 13 14:56:21 chaos2 kernel: 08:41: rw=0, want=830851520, limit=525453988
Jun 13 14:56:21 chaos2 kernel: attempt to access beyond end of device
Jun 13 14:56:21 chaos2 kernel: 08:41: rw=0, want=830851520, limit=525453988
Jun 13 14:56:21 chaos2 kernel: attempt to access beyond end of device
Jun 13 14:56:21 chaos2 kernel: 08:41: rw=0, want=830851520, limit=525453988
But the server as such is working fine serving out both samba and NFS shares. The only probelm as I said before is the refusal to start xserver or kdm. This server is also the server from which I am tryong to copy stuff from. Does anythig here indicate any problem with what I am trying to do.
Thanks.