Network access

[msy]

Hi,

i got 2 networks separated by a Cisco router.

Network1:
ip 10.150.30.10 to 10.150.30.80
gateway: 10.150.30.1
Subnet 255.255.254.0

Network2:
ip 10.134.30.10 to 10.134.32.254
gateway: 10.134.30.1
WINS server: 10.134.30.10
subnet 255.255.254.0

only network1 can access network2 for security reasons. This is done through the router.

I have a Unix server sitting in network1 with ip 10.150.30.12

I have currently experienced a problem getting through to network2 from network1.

I can map shared folders in Network2 and browse them, but cannot access the files.

when i try to copy or open file computer freezes. (ex when try to open a Access database it says “Disk or Network eror”.

I have windows 2000 in Network 1 and NT 4 with SP6 in network 2.

I used ethereal protocol analyzer in network1 and found when i try to access network2 pc with ip 10.150.30.11,
TCP and SMB packets destination to 10.150.30.12 (unix server). There is also few other packets go to 10.150.30.255. but I don’t have a pc with 10.150.30.255.

I think this is the reason i can’t access the network2 and get freeze.

Can anyone plse help be to solve this issue.

thanks

 

[Castor66]

The 10.150.30.255 addresses are broadcasts so I wouldn't worry about them. Can you post the security ACLs on this site so we can see what you are stopping/allowing?