I trying to install Netware on an IBM x345. It doesn't recognize the array so I tried to add the driver using these files IPSRAID.HAM ipsraid.ddi but these files don't show up when I choose insert. Any ideas on this?
I've seen this before with Compaqs. Put the files on a floppy and try loading the files manually(one at a time) at that part of the install. This at the very least cause the following affects:
1. One will load and you will know which driver you need. Once you find out which one you need, press Insert, insert again, F3 and point to the floppy.
2. It will indicate that it could not find the device.
3. Or you will get Public Symbol errors. At this point you can search Novell's support site and try to determine what is missing.
I'm betting that either you have a mismatch of file versions or a required file is not loaded at that point.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.