Netware backup problem with rap.nlm

[EricSummers]

I have a Legato networker client 4.2.1 running on a Netware 5.1 sp5 server. Recently the message "starting bindery lookup service" has started scrolling across the console every 2 seconds. After a bit of troubleshooting, I have determined that the rap.nlm module is causing this to happen. This server continues to back up fine, although backup times has approximately doubled since that message started. I would appreciate any ideas.

 

[Riaan]

I had the same problem when initially tweaking my networker setup. Make sure that the tispx is not commented out in SYS:\NSR\RPCNET.CFG, and is the first entry

this fixed it in my case

Riaan van Niekerk


UNIX sysadmin

Potchefstroom University

South Africa