Netware Admin crashing

[billybarty]

Since reinstall of Netware client 4.83 with SP1 to change to IP connection Netware Admin has been crashing regularly for multiple people. I've done a re-install and am still getting the crashes with when going into applications for a user object Error "" nwadmin32.exe - the instruction at 0x77e23991 referenced memory at 0x109176cc. The required data was not placed into memory "
Any ideas I should try to resolve this.

 

[Ronstid]

Console1 has replaced NWadmin in NetWare 6. Please give it a try; you shouldn't have any problem with it. You may download the newest version (1.3.4) at:

http://download.novell.com/filedist/ctrl

 

[Provogeek]

When you say you reinstall, what exactly are you re-installing? The client or NWAdmin32?

Try downloading the 5.19f NWAdmin from support.novell.com, that is the most current stable version of NWAdmin. Copy this over the top of your NWAdmin directory.

ConsoleOne was intended to replace NWAdmin, but never made it. It is now being replaced with iManager. All three work, use what your comfortable with.

A hint
You don't have to run NWAdmin nor ConsoleOne from the server. Try coping the NWADMN32 and the MGMT\CONSOLEONE directories fromt he servers PUBLIC directory to a location on your hard drive. Brent Schmidt CNE,Network +
Senior Network Engineer
Keep IT Simple

http://www.kiscc.com

 

[billybarty]

Thanks for your help. They are running admin off the server and the client support says it crashes all the time for them as well and they are OK with that until they go to Console1. I've told our helpdesk the client is leaving it as is so they have to deal with it. Thanks again.