Netware 5.0 Error 0x40000001 stage 0

[Guest_imported]

Hi guys

Sorry to put a lame newby question on you...

Its a fresh installation of netware 5.0
using dos 6.22 to boot
system (a) has over 128mb Ram, and has run as a work station without problem for 18 months under windows

System (b) has over 500mb ram and is my current work station.
Both systems fail at exactly the same point of installation with " error 0x40000001 load order template stage 0 "
with reference to insufficent memory..

Any clues please

Ps
Done all the files=40 buffers=30 stuff in config.sys!!
do i have a duff novell CD??
or duff ram in both systems
does Novell run on AMD cpu's ??

I would be greatfull for ANY input

TIA Fraz (AMD800)

 

[donnadee]

Maybe this?

Subject: [prem-5x] ERROR: "Error creating NWKernel Load Template"

TITLE: ERROR: "Error creating NWKernel Load Template"
> PRODUCT: NetWare
> DATE: 08OCT1999
> DOCUMENT ID: 10018593 (Solution: 1.0.33558226.2352368)
> DISTRIBUTION: Partner
>=20
> CORRECTIVE
>=20
> FACT: Novell NetWare 5.0
> Novell NetWare 5.1
> SYMPTOM: ERROR: "Error creating NWKernel Load Template"
> After typing SERVER.EXE to start Netware 5, the server
> errored out at: NWKCFG.NLM
> ERROR: Error (0x40000001) return while executing Load Order
> Template, Stage 0.
> CAUSE: The template files have become corrupt and have to
> be deleted.
> FIX: 1- In NWSERVER directory, delete SERVCFG.NBK,=20
> SERVCFG.000, and SERVCFG.TMP in C:\NWSERVER. Start the server by =
running
> SERVER.EXE in C:\NWSERVER.
> These files will be recreated when SERVER.EXE runs. =20
> The server will start normally.
> 2- If deleting the files does not work, copy SERVER.EXE from
> the patch to C:\NWSERVER.
> 3- If deleting the files and recopying SERVER.EXE does not
> work, please do the following steps.
> 1- Delete the SERVCFG.NBK, SERVCFG.000, and SERVCFG.TMP from =
C:\NWSERVER.
> 2- Bring the server up SERVER -NS -NA.
> 3- LOADSTAGE 1
> 4- LOADSTAGE 2
> 5- STARTUP
> 6- MOUNT SYS
> 7- Manually load the following NLMS, at the server console, in the
> following order. DSLOADER.NLM,=20
> NIT.NLM, IPXSPX.NLM, and BTRIEVE.NLM.
> 8- Load JCMD. (This is a third party utility that enables you to =
treat the
> console prompt as a DOS=20
> prompt. If you don't have JCMD on this server you can copy it to a =
disk
> and load it from the disk). At the=20
> prompt type DIR _NETWARE\SERVCFG.000 and make sure there is a =
SERVCFG.000
> file in the _NETWARE directory=20
> at the root of SYS.
> 9- We need to rename SYS in order to delete this file. Toggle to the
> console prompt and load NWCONFIG |=20
> Standard Disk Options | Netware Volume Options | Highlight SYS =
|
> Change the name of SYS to=20
> something else. For example, OLDSYS. Do not unload, NWCONFIG, just
> toggle to the console.
> 10 - Toggle to JCMD and type DEL OLDSYS:\_NETWARE\SERVCFG.000.
> 11- Once the SERVCFG.000 file in the _Netware directory has been =
deleted,
> toggle back to NWCONFIG and=20
> rename OLDSYS to SYS.
> 12- Exit out of NWCONFIG, unload JCMD, and down the server.
> 13 - Before rebooting the server, delete the SERVCFG.000, =
SERVCFG.NBK, and
> SERVCFG.TMP from the=20
> NWSERVER directory.
> 14 - Bring the server up normally and it should boot without any =
errors.

 

[Guest_imported]

This is very useful...thank you...

But the problem is regarding a fresh installation. Before the “GUI interface”
There are no files present on the hard drive only the novel.tmp and dos 6.22
And the error message is very specific about the amount of system ram available ie below 64mb

 

[TheLad]

What size is your DOS partion?