Netserver LH Pro 200/6 and W2k Installation Problem

[Josh9096]

I am trying to install w2k Server on my Netserver LH Pro 200/6 with dual processors and netraid. I cannot get it to boot from the CD Rom so I made the install diskettes. I get to the blue install screen and then get an error code of 7 where is says the "ntkrnlmp.exe could not be loaded". I understand that this is a BIOS or RAM problem, but I have tried every combination of RAM and processor I could. Even trying to install with just 1 processor installed. Any suggestions? Is there any utility that will tell me exactly what part of the hardware is not working? Thanks for the help.

 

[Gitszer]

Hi - start with the obvious this, have u upgrade to the latest bios? Can u remove one of your memory modules and see if that is causing your problem?

 

[Gitszer]

Hi again, Just did a quick search. Does your bios recogise both processors? If not - it's the bios that's causing your prob. If it does then 8/10 chances its the memory chips. You could try installing on single processor then replacing NTOSKRNL.exe with NTKRNLMP.exe just before you install the second processor!

 

[JKLizard3]

If your drives are mirriored then that's probably your problem.