lacitrixuser
MIS
I have a quick question that I wondered if anyone can give me a quick answer to.
I have a site that currently has a single Internet T-1 with a NS-10 with VPN to a remote site with an NS-5XP.
We are looking at upgrading the NS-10 to a NS-25 and adding a second Internet T-1.
I'd like to have the following config.
Current T-1 to remote site for any VPN traffic and Internet traffic.
Second T-1 with a second VPN to the remote site for VoIP traffic.
Configure the ports to act as a fail-over for each other. So that if one T-1 fails all traffic on that port will be routed to the active line.
This seems simple in theory, but I wasn't sure from reading the product data sheet if this was supported.
Any input is appreciated.
Thanks.
I have a site that currently has a single Internet T-1 with a NS-10 with VPN to a remote site with an NS-5XP.
We are looking at upgrading the NS-10 to a NS-25 and adding a second Internet T-1.
I'd like to have the following config.
Current T-1 to remote site for any VPN traffic and Internet traffic.
Second T-1 with a second VPN to the remote site for VoIP traffic.
Configure the ports to act as a fail-over for each other. So that if one T-1 fails all traffic on that port will be routed to the active line.
This seems simple in theory, but I wasn't sure from reading the product data sheet if this was supported.
Any input is appreciated.
Thanks.