Netraid HP LH plus

[allcam]

Dear friends,

I have a HP netserver LHplus; the Hp Netraidadapter settings have been changed; the scsi device channel is now holding on ID 5 and the message "No Hp netraid adaptor"

Normaly you can change the settings by pressing CTRL M; but that won´t work;
Is there a simple solution to get into the "HP netraid" menu ?? I already tried to "flash the bios" but with no result.

Anyone a solution ? I would be grateful


Greetings

Allcamjan

 

[ricpinto]

Don't change SCSI ID of host which is 7. If you change if to 5 and you have a HDD which ID is also 5, then there's a conflict and that's why your adapter was disabled.