jfguilmard
IS-IT--Management
Hi,
I'm experiencing some problems with my netra x1...
First, the server was working well since a while, ( one year ) and once i lost any control on it ( no answer, even to ping ).
So, i've used the lom console access to solve the pb, via an hyperterminal connection. Poweroff Poweron was working, but when i closed the hyperteminal connection, the system didn't answer again.
I've found on internet to modify /etc/system by adding:
set abort_enable = 3D0 = 20
then i've rebooted and ....... the server is rebooting continuously, without letting me do anything.
Don't know what happens !! Anyway, i want to go back to my old configuration, but i don't have any access to the file system !!!
Please help
thkx
Jef
I'm experiencing some problems with my netra x1...
First, the server was working well since a while, ( one year ) and once i lost any control on it ( no answer, even to ping ).
So, i've used the lom console access to solve the pb, via an hyperterminal connection. Poweroff Poweron was working, but when i closed the hyperteminal connection, the system didn't answer again.
I've found on internet to modify /etc/system by adding:
set abort_enable = 3D0 = 20
then i've rebooted and ....... the server is rebooting continuously, without letting me do anything.
Don't know what happens !! Anyway, i want to go back to my old configuration, but i don't have any access to the file system !!!
Please help
thkx
Jef