Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Netmask display
- Thread starter alechko
- Start date
ip netmask-format
To specify the format in which netmasks are displayed in show command output, use the ip netmask-format line configuration command. To restore the default display format, use the no form of this command.
ip netmask-format {bitcount | decimal | hexadecimal}
no ip netmask-format [bitcount | decimal | hexadecimal]
bitcount Addresses are followed by a slash and the total number of bits in the netmask. For example, 131.108.11.0/24 indicates that the netmask is 24 bits.
decimal Network masks are displayed in dotted decimal notation (for example, 255.255.255.0).
hexadecimal Network masks are displayed in hexadecimal format, as indicated by the leading 0X (for example, 0XFFFFFF00).
To specify the format in which netmasks are displayed in show command output, use the ip netmask-format line configuration command. To restore the default display format, use the no form of this command.
ip netmask-format {bitcount | decimal | hexadecimal}
no ip netmask-format [bitcount | decimal | hexadecimal]
bitcount Addresses are followed by a slash and the total number of bits in the netmask. For example, 131.108.11.0/24 indicates that the netmask is 24 bits.
decimal Network masks are displayed in dotted decimal notation (for example, 255.255.255.0).
hexadecimal Network masks are displayed in hexadecimal format, as indicated by the leading 0X (for example, 0XFFFFFF00).
- Thread starter
- #3
- Status