Netgear314 Router 1

[kafass]

Is anyone else experiencing lockup problems with the netgear 314 router? It seems that when I use telnet to enter setup more than a couple of times, it becomes unstable. Telnet attempts become intermitting. Next I am unable to enter thru the browser.

A reset must be accomplished thru a serial connection but it will not work once lockup problem starts. Any help with why this is happening would be appreciated.

 

[jeter]

i'm not sure about the netgear, however I had a Cisco lock up on me when implementing ppp multilink. Whenever I activated the 2nd WAN connection it locked
up. The problem was because of flaky software. A quick upgrade resolved the problem. #-) Good Luck !!!