Netgear FVL328 VPN Router

[RIJ]

I have just obtained an FVL328 ROuter to replace my FVS318, but i can not get the VPN (was FVS318 to FVS318) going.

Note that i now have FVL328 to FVS318

Netgear have a document i have seen before on making these two boxes talk...but can not find it.

Do you know where it is??

Or ... anywhere else i can get a definite answer as to the setup required to conect these 2 boxes.

Many Thanks ... RJ

 

[ChicagoTechNet]

we need more information to help. can you each other? what's the error code and the details.

Robert Lin, MS-MVP, MCSE & CNE
Windows, Network and How to at

http://www.ChicagoTech.net

 

[RIJ]

Firstly, Netgear had a wWeb Site with documents on it on how to configure an FVS318 to an FVS318 or to an FVL328, but i can no longer find it.


Secondly,
Here are the configuration points for the FVS318-FVS318 VPN:
Connection Name at BOTH ends: TFS_FC
Local IPSec (at my end and other end Remote: TFS_FC
Remote IPSec (at my end and other end Local: FC_TFS
Remote Site: LAN
Remote LAN IP: 10.0.0.0
Remote LAN Subnet Mask: 255.0.0.0
Remote WAN IP: is a FQDN
Sec Association: Main Mode
PFS: Enabled
Encription: DES
PreShare Key: is set
Key Life: 3600
IKE Life Time: 28800
NetBios Enabled: Yes
and standard "Services" are enabled


On my end FVL328 i have set up:
IKE Policy:
Policy Name: TFS_FC
Direction: Both
Exchange Mode: Main Mode
Local Identity: FQUN & TFS_FC
Remote Identity: FQUN & FC_TFS
ENcryption: DES
Authentication: tried both options
PreShare Key: is set as before
DH Group: Group 1
SA Life: 28800

VPN - Auto Policy
Policy Name: TFS_FC
IKE Policy: from drop down, TFS_FC
ENdpoint: FQDN & Domain Name
SA Life: 28800 & 0
IPSec PFS: Group 1
Local IP: Any
Remote IP: Any and have tried 10.0.0.0 & 255.0.0.0
ESP Encription: DES
NetBios: Enabled

-------------
RJ