Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Netgear FS750 switch

Status
Not open for further replies.

kpeterson

IS-IT--Management
Jun 7, 2005
42
CA
I recently aquired a 48 port netgear FS750 switch, i hooked it up to my Dlink DI-604. I hooked one Va liunux server up to the switch but I can only ping 192.168.0.1 after I hit the reset button on the switch. I have perfect network connectivity for about 30 second until I get the following:

# ping 192.168.0.108
PING 192.168.0.108 (192.168.0.108) 56(84) bytes of data.
64 bytes from 192.168.0.108: icmp_seq=1 ttl=64 time=0.570 ms
64 bytes from 192.168.0.108: icmp_seq=2 ttl=64 time=0.169 ms
64 bytes from 192.168.0.108: icmp_seq=3 ttl=64 time=0.170 ms
64 bytes from 192.168.0.108: icmp_seq=4 ttl=64 time=0.171 ms
64 bytes from 192.168.0.108: icmp_seq=5 ttl=64 time=0.171 ms
From 192.168.0.100 icmp_seq=47 Destination Host Unreachable
From 192.168.0.100 icmp_seq=48 Destination Host Unreachable
From 192.168.0.100 icmp_seq=49 Destination Host Unreachable
From 192.168.0.100 icmp_seq=51 Destination Host Unreachable
From 192.168.0.100 icmp_seq=52 Destination Host Unreachable
From 192.168.0.100 icmp_seq=53 Destination Host Unreachable
From 192.168.0.100 icmp_seq=55 Destination Host Unreachable


I have tried hooking the dlink and netgear with a straight through cable and a cross over. Any idea what is wrong because i sure don't. Thanks for any help in advance.

Kyle P
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top