Hi,
Pretty new to using netflow, but a little confused. Dont know if any experience netflow guys can help.
I think this is down to a software version however I have some 7200 routers.
With the "ip flow-export version" command they both support version 1 and version 5.
however on the interface the commands are different.
1 Router will only support "ip route-cache flow" and the other router "IP Flow Ingress"
Also, on the router that Im using "IP Flow Ingress" on one gig interface, it seems to export Ingress and egress for both active gig interfaces..... not just Ingree on the interace its active....
Thanks in advance, lee.
LEEroy
MCNE6,CCNP,CWNA,CCSA,Project+
Pretty new to using netflow, but a little confused. Dont know if any experience netflow guys can help.
I think this is down to a software version however I have some 7200 routers.
With the "ip flow-export version" command they both support version 1 and version 5.
however on the interface the commands are different.
1 Router will only support "ip route-cache flow" and the other router "IP Flow Ingress"
Also, on the router that Im using "IP Flow Ingress" on one gig interface, it seems to export Ingress and egress for both active gig interfaces..... not just Ingree on the interace its active....
Thanks in advance, lee.
LEEroy
MCNE6,CCNP,CWNA,CCSA,Project+
