Netfinity 7000 M10 hangs at CP:66 ...

[Guest_imported]

Hi,

I've got a problem on a Netfinity 7000 M10 Server, The system boots properly but stops at "CP:66" on "The Information LED Panel". Nothing appears on the monitor, impossible to press F1 or F2 for config or diagnostics... Unfortunately, I can't find anything about that in the book or on the IBM website...
Here is the config of the server (if the code has something to deal with that...)
1 PIII Xeon 500 (512 Kb cache) with 2 appropriate VRM's
1 Memory Board with 4* 64Mb EDO ECC (all in Bank1)
0 HDD
0 Adapters
(The system is in minimum config.)

If somebody can help me on this (It has happen on 2 same servers with same config)

Thanks already.

 

[Guest_imported]

Ok now it's resolved. The processor was faulty.

Thanks.