Netfinity 6000R Unkown Device

[Stannerack]

Can anybody give me a pointer on this?

I have installed Win2k Server on our Netfinity 6000R and it is showing an unknown device with no drivers loaded. It has the following hardware installed:

ServeRAID 4M, Adaptec 2940UW, IBM Gigabit SX Adaptor. I have disabled on board ethernet.

I have installed the following drivers/BIOS:

ServeRAID 5.10, IBM Gigabit SX, ASMA, Bios v1.08

Win2k picked up the 3 SCSI adaptors (2 on board, 1 PCI).

What could be this unknown device? It is showing no resources.

Thanks

 

[mpmartin68]

That would be the IBM Active PCI Driver. Attached is a link to the driver file on their site. This is also a feature of the 8500 as well...MPM

http://www.pc.ibm.com/qtechinfo/MIG...=IBM+PC+Server&family=Netfinity+6000R&model1=

 

[Stannerack]

Thats done it!

Many thanks

The odd thing is, is that Win2k showed the unplug icon on the system tray showing that the IBM ServaRAID, the Gigabit adaptor and the SCSI card can all be hot plugged before the active PCI driver was installed.

Anyway, that is a bit of peace of mind knowing all drivers are now loaded.