Netfinity 5500 Processor Upgrade 1

[JLHobby1]

I just recently came across dual PIII 667/256/133's with vrm's for my Netfinity 5500-U11 which has PII 350/100's in it. I tried imcreasing my bus speed through the bios setup, however I guess you can't do that with netfinities. So now I'm trying to switch the bus speed to 133 via mobo jumpers, but I can't seem to find them????? Off course I can't find info from ibm so I was wondering if anyone would know the "J" location and the position of the jumpers to make it a 133??????

Thanks
JL

 

[ibmtech65]

Start here. Does not look like the PIII 667 will go in that machine.

http://www-1.ibm.com/support/docview.wss?uid=psg1DDSE-436L4W

 

[JLHobby1]

Thanks Ibmtech65. I finally came across that site last nite and I also can across the manual and it only looks like the multiplier goes to 4.5x and thats it. As for bus speed it looks like changing bus speed affects the whole system which isn't feasable for me. (this is all new to me by the way). I greatly appreciate your help and time taken to reseach this issue with me!!!!!

jl