Netbios over TCP/IP in router cisco

[humix1]

Hi
I need your help. I have a cisco 1605 with 2 ethernets and i need that the traffic NETBIOS go across the 2 interfaces.

i have configured the next lines:
ip forward-protocol udp 137
ip forward-protocol udp 138
ip forward-protocol udp 139
ip forward-protocol spanning-tree

But when you go to configuration running the 1st and the 2nd lines are not there.
What it is happening?

Thanks

 

[ak8899]

You need to configure a
ip helper-address <address of server>
on the interface closest to your clients.

That'll do it.

regards,
Alain