Hi
I need your help. I have a cisco 1605 with 2 ethernets and i need that the traffic NETBIOS go across the 2 interfaces.
i have configured the next lines:
ip forward-protocol udp 137
ip forward-protocol udp 138
ip forward-protocol udp 139
ip forward-protocol spanning-tree
But when you go to configuration running the 1st and the 2nd lines are not there.
What it is happening?
I need your help. I have a cisco 1605 with 2 ethernets and i need that the traffic NETBIOS go across the 2 interfaces.
i have configured the next lines:
ip forward-protocol udp 137
ip forward-protocol udp 138
ip forward-protocol udp 139
ip forward-protocol spanning-tree
But when you go to configuration running the 1st and the 2nd lines are not there.
What it is happening?